ALIGNMENT GUIDE INSTRUCTIONS

To use the alignment guide, you'll need the following:

  • A measuring tape

  • A pencil, pen, or marker

  • Painters tape

  • A level

    • I recommend a digital level if you have access to one

Instructions

  1. Using the measuring tape and painters tape, find the horizontal center  

  2. Add a second mark to indicate where you would like the lowest point of the logo to be directly

    • Remove first mark

  3. Using the tape and level, place the center ​piece of the alignment guide on the wall with the center mark lined up with the mark on the wall.

    • Make sure that its as level. It will be hard to change later. ​

  4. Place the pieces of the logo that corresponds to the centerpiece or the alignment guide on the wall using whatever mounting method you ordered.  (peel-and-stick backing, your own adhesive, nails etc.)

  5. ​Repeat steps #3 and #4 with the rest of the pieces of the alignment guide.

  6. Carefully remove the alignment guide one piece at a time  and the mark on the wall.

  7. If you used the peel-and-stick, Press hard on the pieces of the logo to ensure they're secure on the wall.

  8. If the material you ordered has a protective masking on the front surface, carefully remove it from each piece.

  9. Step back and admire your handiwork! 

  10. If you feel inclined, send me some photos!